Today I just about finished my bass bar, the last step being sanding with 220 grit sand paper. Oh looking through my notes I see one very important and exciting step I neglected to mention (this is why I need to write more). . .graduating the inside of my top plate. It was quick for me and fun, but the guys are still ahead of me. We were given different thicknesses that we used fingerplanes to get to. They were rough dimensions. As I reached these dimensions Brian began to explain what we were looking for. After all, all wood is a little different.....so the order of importance I was told is 1)Flexibility 2)Weight 3)Taptones. He explained the different ways to check the flexibility also. Flexing the plate with the grain, across the grain, and diagonally. Now I know there are people out there that put great importance to taptones and although I know relatively little about the Carlene Huthchins method, I don't doubt there is truth there. It is just interesting how very diverse making can be and the importance people put on each step. Anyway, so we don't go crazy with taptones, but I have to say Brian justifies it quite well. Here's something I thought was interesting. Brian said you have to be careful of making the area below the f-holes too thin, because it can produce wolf tones if you do. As I began to take my plate thinner and thinner Brian was able to deduce that my wood is dense and therefore a little stiff. My rough dimensions from edge to center started out at 2.8mm, 3.3, 3.4, 3.5, and 3.2 below the f-holes. I ended after scraping with my final dimensions being 2.3, 2.6, and 3 in center. Brian gives us ranges of thicknesses for almost everything we do. It really all depends on the wood. After I finished my graduation of the top plate, its weight was 68.2g and I had a taptone of an E at the edge and Dflat at the center. Which is close to an octave which is good. So this whole process took me about half as much time as the boys and I began feeling better....
Then since we left the wings of the f-holes attached to do the graduating, I went back and completely finished the f-holes. Then began bass bar placement. I first cut, shaped, and glued the cleats. One very handy tool we use in fitting the bass bar is soft white chalk. This way we can scoot the bass bar on the plate after rubbing the chalk on the plate and see where the bar is touching the plate already and where to cut more. The point with the bass bar is to create a little tension on the ends. To test this you hold the ends of the bar down and you should be able to either see or feel the f-hole wing just above it move up. This is sort of your tension gauge. You also want the bar to roll from one end to the other nicely, no bumps or flat spots or points where it rocks like a teeter-totter. So after the bar was glued, I removed the cleats and began shaping it. At one point while graduating the spruce and after weighing and taptuning it Brian said, "Wow you are building a race car here Tess, I don't know if you can handle it." You know what I said..."Oh yes I can."
On another note, I took my fiddle in today to glue a seem for the second time. This dry weather is rough. My roommate either wants me to move out or he is thinking he might, and I am still uncertain what I want to do with my life....You know I had a thought today. I had a great weekend this past weekend, approaching the best weekend I have ever had. It was fun. But for me, life is about a little more than just having fun. I think that was important for me to realize because you hear people talking about wanting to be happy or living a happy life. You are happy when you are having fun right? But the fun can't last forever, and when it ends, what is left? The trick is to be very happy at something that makes you a lot of money :)
Today I also began graduating my maple after taking it of the rib assembly and form....
Tuesday, February 1, 2011
Sunday, January 16, 2011
Sunday, January 9, 2011
Back at it again. Break was wonderful, and I am already making plans for the next one in March. I have to say, getting back to school was nice. Right away I made another scraper for detail work on the instrument. Oh and I'm going to try to post some pictures of the fiddle either here or on facebook or both....My birthday is coming up on Saturday as some of you have already posted me Happy Birthday messages. Thank you...I am missing a great time this month at the Western Hills festival in Oklahoma. You guys better not have too much fun without me!
On Friday I finished putting a second coat of shellac on the f-hole knife handle. It is beautiful, might I add. This week was both really great and really frustrating, but I am learning lots of course.
I just called a lady about playing for an hour apiece on Friday and Saturday this week. It is a no-pay gig, but that's okay. I still can do my share of charity.
On Friday I finished putting a second coat of shellac on the f-hole knife handle. It is beautiful, might I add. This week was both really great and really frustrating, but I am learning lots of course.
I just called a lady about playing for an hour apiece on Friday and Saturday this week. It is a no-pay gig, but that's okay. I still can do my share of charity.
Friday, December 17, 2010
A Milestone
Today I finished my purfling. This is the time in many makers' opinions that signifies something. From here on things go a little quicker, I am told. Brian asked me if I was going to celebrate. Yes! Jam tonight at the arts center. That's really all I have to say. See you soon.
Tuesday, December 14, 2010
Good times
Okay all you excited onlookers! I am now working on purfling my beautiful and unique violin. All I have to say is SHIM! This is when, because of cutting the channel for the purfling too wide, you have to fill it with wood shavings, otherwise there will be gaps between the instrument and purfling. I have also been creating the wonderful bee stings. And it is said Strad took the easy way out and created his bee stings with black soot, not messing with actually cutting the purfling that way.
Friday is our final, which will consist of a written test over the Stradivari book we have been reading written by the Hill brothers. Next semester we will read about Guarneri.
Man I am excited to come home for Christmas. I feel like I need to make a list of all the people I need to see and things to do...Shelby is flying here this weekend and we will fly back to KC Wednesday. Shopping this weekend! Gifts, gifts, gifts, luckily if it all works out, I will be making most of mine. Something that made me happy today was getting up extra early and working on my Christmas cards. It has been lots of fun making them. Let's see what else has been going on.....not much. Happy Holidays Everyone. And now I'm off to work on gifts at the art center!
Friday is our final, which will consist of a written test over the Stradivari book we have been reading written by the Hill brothers. Next semester we will read about Guarneri.
Man I am excited to come home for Christmas. I feel like I need to make a list of all the people I need to see and things to do...Shelby is flying here this weekend and we will fly back to KC Wednesday. Shopping this weekend! Gifts, gifts, gifts, luckily if it all works out, I will be making most of mine. Something that made me happy today was getting up extra early and working on my Christmas cards. It has been lots of fun making them. Let's see what else has been going on.....not much. Happy Holidays Everyone. And now I'm off to work on gifts at the art center!
Friday, December 3, 2010
You know Brian was telling one of the students about when he was little. These are the stories I wish I had when I was little; maybe I just don't realize them yet....Anyways, he was saying he could remember when he was five years old he built a wooden ash tray. He said it felt like he spent hours on it. He would go in the basement to work on it and it took a couple days. He ended up giving it to his dad as a gift. He said from then on he knew he was going to be a wood worker....can kids really come to that realization??? That's amazing to me. I would like to find my niche.
Today I continued practicing purfling. Still working on those curves. I didn't want to show Brian my first try, but he told me, believe it or not, he has seen much worse. Haha that was a little uplifting I guess.
House sitting is soon coming to an end. It was nice.....oh I think I should get snow tires.
Goodbye
Today I continued practicing purfling. Still working on those curves. I didn't want to show Brian my first try, but he told me, believe it or not, he has seen much worse. Haha that was a little uplifting I guess.
House sitting is soon coming to an end. It was nice.....oh I think I should get snow tires.
Goodbye
Thursday, December 2, 2010
Florence
I am jamming out to Crooked Still at the moment....well not really jamming, more like intently listening. I spent about an hour listening to a couple of their songs today and singing along; it was great....Ok well house sitting is going well. The other night I watched Julie and Julia, about the two cooks. And one of the girls blogged about her cooking. Her blog took off so much that she was getting calls to be on T.V., to write a book, to make a movie. It was based on a true story too. I just thought it was cool how her blog became really really poplar and started her off on a career. You never know, you know?
Today I began practicing purfling. We use three different tools for this. A purfling marker, pick, and a knife grounded specifically for this process. There are always stories Brian tells us about when he was in school at Chicago, like when it was time for him to start his purfling he just did it with a regular knife. No one told him you made a new knife for purfling, which doesn't seem like a big deal, but let's see you try it. Ya but he said all the students came over to him and were asking what he was doing. He wasn't told a lot of things when he was going to school that he fills us in about. It sounds like we have it easy compared to "back in the day".
Ok so Monday I brought my violin in to school to glue the upper seem together and Brian told me all the things that could/should be done to my violin. And guess what Allen you were right. I need a new bridge. It wasn't that I didn't believe you....I guess I am a little finicky about working on it. I guess I will have to wait a while longer to do it myself. I also continued finishing my outline on the violin I am building.
Tuesday I worked on making a handle for my purfling knife and grinded some on my purfling marker.
Wednesday, I finished grinding and honing the blades for the marker and learned how to install them properly. I also finished my handle, which I was informed took too long. I take too long often. Haha....
Today, I started practicing purfling on scrap wood. Doing straight lines wasn't too bad. The curves are another story. You want the channel about 1.7mm deep. The second try I got my channel as deep as 4mm or close to that. I was told I had made the grand canyon literally :P whupps.....
Today I began practicing purfling. We use three different tools for this. A purfling marker, pick, and a knife grounded specifically for this process. There are always stories Brian tells us about when he was in school at Chicago, like when it was time for him to start his purfling he just did it with a regular knife. No one told him you made a new knife for purfling, which doesn't seem like a big deal, but let's see you try it. Ya but he said all the students came over to him and were asking what he was doing. He wasn't told a lot of things when he was going to school that he fills us in about. It sounds like we have it easy compared to "back in the day".
Ok so Monday I brought my violin in to school to glue the upper seem together and Brian told me all the things that could/should be done to my violin. And guess what Allen you were right. I need a new bridge. It wasn't that I didn't believe you....I guess I am a little finicky about working on it. I guess I will have to wait a while longer to do it myself. I also continued finishing my outline on the violin I am building.
Tuesday I worked on making a handle for my purfling knife and grinded some on my purfling marker.
Wednesday, I finished grinding and honing the blades for the marker and learned how to install them properly. I also finished my handle, which I was informed took too long. I take too long often. Haha....
Today, I started practicing purfling on scrap wood. Doing straight lines wasn't too bad. The curves are another story. You want the channel about 1.7mm deep. The second try I got my channel as deep as 4mm or close to that. I was told I had made the grand canyon literally :P whupps.....
Subscribe to:
Posts (Atom)